Rework the PA junction to match the reference drawing: yellow = PA -> highway
(entry), red = highway -> PA (exit). Entry and exit swap sides (entry now
EAST, exit WEST) and both trunks hug the PA perimeter instead of running
concentric spirals.
The simplification: both carriageways sit at the same deck level, adjacent,
so the median opening IS the far-side access path. The under-deck crossing
and merge runs are deleted outright -- 8 runs collapse to 4, and the
girder-soffit ceiling logic that constrained the crossing goes with them.
Part count 24,210 -> 21,691.
The median opening is now load-bearing rather than cosmetic (it is the only
route from the far carriageway to the ramps), so it widens from 6 to 9
samples per junction.
Orientation is a single flip-able constant (ORIENT) so a mirrored result is
a one-line correction, not a rewrite.
Measured on the built map (not asserted):
- 600 entry + 600 exit ramp parts
- max grade 8.00% / 8.27%, under the 9% limit
- 0 collisions with piers/masts/girders (558 structural parts)
- segment continuity <= 2.5 studs; trunk->merge handoff <= 1.7 studs
- merge lands at dY 0.0 (exact deck level), 33 studs lateral
- median open at junctions: 0 parts vs. control ~7 on plain mainline
Two traps worth recording, both caught by controls:
1. Studio's require() cache silently rebuilt STALE code. The first "passing"
build reported 17,575 parts and zero ramps, and the map contained
PAOffRamp/PAOnRamp parts whose names exist nowhere in the current source.
Every measurement taken before this was describing an old map. Added
tools/rebuild_fresh.luau, which clones the module to bust the cache; use
it rather than requiring MapBuilder directly.
2. A reported "median never opens" bug was a bad probe, not a defect. It
counted `Barrier` (the outer edge parapet, which must NEVER open) instead
of `Median_<i>`. Re-run against the right name: control 7, junctions 0.
Both were only visible because the probes carry controls -- a 0-hit result
with no control is vacuous. The verification harnesses are kept in tools/
with their controls built in.
jesse
1d23c187ad
