Daikoku PA: lift mainline over the apron, rebuild both ramps

Browse Source

The PA ring road and the expressway mainline were both at ground level, so
the ring parapet stood INSIDE the carriageway (measured -10.0 studs of
vertical overlap: a wall in the middle of the road).

Reference photos of the real Daikoku Futo PA show the expressway flying
OVER the parking apron on pillars, with the PA at ground level and ramps
climbing up to meet it. Rebuilt to match:

- mainline lifted 38 studs through the junction, eased in/out (max 5.26%
  grade, within real expressway limits)
- PA ring + apron stay at ground level; legacy PARingPillar props removed
- both on/off ramps regraded over the full rise with smoothstep easing,
  segments overlapped 3 studs so wheels can't catch a seam, plus support
  pillars and edge kerbs where the deck is high

Verified in-engine against built parts (tools/diag_daikoku.luau), not just
source: clearance now +28.0 studs, both ramps continuous (max step 5.62,
no gaps). tools/plot_daikoku.py renders the plan/section for comparison.

...

This commit is contained in:

jesse

2026-08-02 15:56:13 -04:00

parent 8808b919c3

commit c8dabea53a

51 changed files with 6558 additions and 65 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download Patch File Download Diff File Expand all files Collapse all files

tools/daikoku_check.png

BIN

Binary file not shown.

Side by Side After Width:  |  Height:  |  Size: 151 KiB